Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 573

Audio Commands
Digital Gain Control +WDGR
©Restricted
Page:
25 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 4
August 23, 2007
21.8.3
Parameters and Defined Values
<Configuration>:
audio configuration
1 HWL_AUDIO_DSP_RX_PGA_CONF
2 HWL_AUDIO_DSP_RX_VOL_CONF
<Rgain>:
reception gain
range: 0-255
(default value: 64)
21.8.4
Parameter Storage
The parameters are stored in EEPROM without using the AT&W command The
default value can be restored using AT&F and "AT+VIP=1".
21.8.5
Examples
Command
Responses
AT+WDGR=?
+WDGR: (1-2),(0-255)
OK
Note: Possible values
AT+WDGR=1,25
OK
Note: PGA configured with a gain of 25
AT+WDGR?
+WDGR: 1,25
+WDGR: 2,64
OK