Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 319)

GPRS Commands
GPRS Event reporting +CGEREP
©Restricted
Page: 129 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.16 GPRS Event reporting +CGEREP
14.16.1 Description
This command enables or disables sending of +CGEV unsolicited result codes from
MT to TE in the case of certain events occurring in the GPRS MT or the network.
14.16.2 Syntax
Action command
AT+CGEREP=<mode>[,<bfr>]
OK
Read command
AT+CGEREP?
+CGEREP: <mode>,<bfr>
OK
Test command
AT+CGEREP=?
+CGEREP: (list of supported <mode>s),(list of supported <bfr>s)
OK
• If <event>=ME REJECT
Unsolicited response
+CGEV: <event> <PDP_type>, <PDP_addr>
• If <event>= NW REACT or NW DEACT or ME DEACT
Unsolicited response
+CGEV: <event> <PDP_type>, <PDP_addr>[,<cid>]
• If <event>=NW DETACH or ME DETACH
Unsolicited response
+CGEV: <event>