Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 558)

Audio Commands
Ringer Sound Level +CRSL
©Restricted
Page: 10 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
21.2 Ringer Sound Level +CRSL
21.2.1 Description
This command is used to set/get the sound level of the ringer on incoming calls. The
action command changes the default <volume> value of the +CRMP command.
21.2.2 Syntax
Action command
AT+CRSL=<sound level>
OK
Read command
AT+CRSL?
+CRSL: <sound level>
OK
Test command
AT+CRSL=?
+CRSL: (list of supported <sound level>s)
OK
21.2.3 Parameters and Defined Values
<sound level>:
ringer sound level
range: 0-15
(default value : 6)
21.2.4 Parameter Storage
The <sound level> parameter is stored in EEPROM using the AT&W command. The
default value can be restored using AT&F.