Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 525)

Supplementary Services Commands
Supplementary Service Notifications +CSSN
©Restricted
Page: 179 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
20.6.3 Parameters and Defined Values
<n>: MO supplementary service notification
0 disable (default value)
1 enable
When a supplementary service notification is received
after a mobile originated call setup, intermediate result
code +CSSI is sent before any other MO call setup result
codes.
<m>: MT supplementary service notification
0 disable (default value)
1 enable
When a supplementary service notification is received
during a call, unsolicited result code +CSSU is sent.
<code1>: manufacturer specific service code
0 unconditional call forwarding is active
1 some of the conditional call forwarding are active
2 call has been forwarded
3 call is waiting
4 Closed User Group call, with CUG <index>
5 outgoing calls are barred
6 incoming calls are barred
7 CLIR suppression rejected
8 call has been deflected