Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 106)

Global Configuration Commands
Select TE Character Set +CSCS
©Restricted Page: 100 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.17.3 Parameters and Defined Values
<Character Set>:
character table set (ASCII string)
"GSM" GSM default alphabet.
"PCCP437" PC character set code page 437 (default value)
"CUSTOM" user defined character set
"HEX" hexadecimal mode. No character set used; the user can read
or write hexadecimal values
6.17.4 Parameter Storage
The <Character Set> parameter is stored in EEPROM using AT&W command. The
default value can be restored using AT&F.
6.17.5 Examples
Command Responses
AT+CSCS=?
Note: Get possible values
+CSCS: ("GSM","PCCP437","CUSTOM","HEX")
OK
AT+CSCS="GSM"
Note: GSM default alphabet
OK
AT+CSCS?
Note: Get current value
+CSCS: "GSM"
OK
Note: GSM default alphabet