Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 267)

Data Commands
Select Data Compression %C
©Restricted
Page: 77 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
13.7 Select Data Compression %C
13.7.1 Description
This command enables or disables data compression negotiation.
13.7.2 Syntax
Action command
AT%C[<n>]
OK
Read command
AT%C?
<n>
OK
Test command
None
13.7.3 Parameters and Defined Values
<n>: compression mode
0 no compression (default value)
2 V42 compression if supported
13.7.4 Parameter Storage
<n> is stored in EEPROM using the AT&W command. The default value can be
restored using AT&F.