Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 698)

Fax class 2 Commands
DCE Capabilities Parameters +FDCC
©Restricted
Page: 150 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
26.11 DCE Capabilities Parameters +FDCC
26.11.1 Description:
This command allows the DTE to configure the capabilities used for the any session.
26.11.2 Syntax
Action command
AT+FDCC=[<vr>][,[<br>][,[<wd>][,[<ln>][,[<df>][,[<ec>][,[<bf>]
[,[<st>]]]]]]]]
OK
Read command
AT+FDCC?
<vr>,<br>,<wd>,<ln>,<df>,<ec>,<bf>,<st>
OK
Test command
AT+FDCC=?
(list of supported <vr>s),(list of supported <br>s),(list of
supported <wd>s),(list of supported <ln>s),(list of supported
<df>s),(list of supported <ec>s),(list of supported <bf>s),(list
of supported <st>s)
OK