Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 259
Data Commands
DTE-DCE Local Rate Reporting +ILRR
©Restricted
Page:
69 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 2
August 23, 2007
13.3.3
Parameters and Defined Values
<value>:
local port rate report
0
disable (default value)
1
enable
<rate>:
current (negotiated or renegotiated) DTE-DCE speed rate
values in bps
300
600
1200
2400
4800
9600
19200
38400
57600
115200
230400
460800
921600
13.3.4
Parameter Storage
The <value> parameter are stored in EEPROM using the AT&W command. The
default value can be restored using AT&F.
13.3.5
Examples
Command
Responses
AT+ILRR=?
+ILRR: (0,1)
OK
AT+ILRR=0
OK
Note: Local port rate report disabled
Note: Command valid
AT+ILRR=1
OK
Note: Local port rate report enabled
Note: Command valid