Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 540)

Supplementary Services Commands
Advice Of Charge +CAOC
©Restricted
Page: 194 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
20.11.3 Parameters and Defined Values
<mode>:
requested operation
0 query CCM value
1 deactivate the unsolicited reporting of CCM value (default
value)
2 activate the unsolicited reporting of CCM value
<ccm>: current call meter value
three bytes of the current call meter value in hexadecimal format
(e.g. "00001E" corresponds to the decimal value 30). The value is
in home units and bytes are coded in a similar way as the
ACMmax value in SIM.
string type
20.11.4 Parameter Storage
The <mode> parameter is stored in EEPROM using the AT&W command. The default
value can be restored using AT&F.
20.11.5 Examples
Command Responses
AT+CAOC=? +CAOC: (0-2)
OK
Note: Request supported modes Note: 0, 1, 2 modes supported
AT+CAOC=0 +CAOC: "000A08"
OK
Note: Query CCM value Note: Display CCM value (CCM=2568)
AT+CAOC=1 OK
Note: Deactivate unsolicited report of CCM
value
Note: CCM report deactivated
AT+CAOC=2 OK
Note: Activate unsolicited report of CCM value Note: CCM report activated
AT+CAOC? +CAOC: 2
OK
+CCCM: "000A09"
Note: Unsolicited CCM value