Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 255)

Data Commands
Bearer Type Selection +CBST
©Restricted
Page: 65 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
13.2 Bearer Type Selection +CBST
13.2.1 Description
This command allows to select a bearer type for outgoing and incoming data calls.
13.2.2 Syntax
Action command
AT+CBST=[<speed>][,[<name>][,<ce>]]
OK
Read command
AT+CBST?
+CBST: <speed>,<name>,<ce>
OK
Test command
AT+CBST=?
+CBST: (list of supported <speed>s),(list of supported
<name>s),(list of supported <ce>s)
OK