Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 494)

SIM ToolKit Commands
SIM ToolKit Get Information +STGI
©Restricted
Page: 148 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
• For <CmdType>=6: get information about "Sel Item" (SIM expects an item
choice sent using +STGR)
Action command
AT+STGI=<CmdType>
+STGI: <DefaultItem>, <Alpha Identifier menu>
+STGI: <Id>,<NbItems>,<AlphaId Label>,<HelpInfo>[,<NextActionId>]
[+STGI: <Id>,<NbItems>,<AlphaId Label>,<HelpInfo>[,<NextActionId>]
[…]]
OK
• For <CmdType>=7: get information about "Refresh" (No action, "Refresh" done
automatically by product).
Action command
AT+STGI=<CmdType>
+STGI: <RefreshType>
OK
• For <CmdType>=8: get information about "Send SS" (No action, "Send SS" done
automatically by product).
Action command
AT+STGI=<CmdType>
+STGI: <TextInfo>
OK
• For <CmdType>=9: get information about "Send SMS" (No action, "Send SMS"
done automatically by product).
Action command
AT+STGI=<CmdType>
+STGI: <TextInfo>
OK