Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 670)

CPHS Commands
Wavecom Alternate Line Service: +WALS
©Restricted
Page: 122 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
24.3.3 Parameters and Defined Values
<CmdType>: requested operation
0 sets active line
1 gets active line
<Lineld>: line number
used only with <CmdType>=0
1 line 1
2 line 2
24.3.4 Parameter Storage
The <Lineld> parameter is stored in EEPROM without using the AT&W.command
24.3.5 Examples
Command Responses
AT+WALS=? +WALS: (0-1),(1-2)
OK
AT+WALS=0,1
Note: Activate line 1
+WALS:1
OK
AT+WALS=1
Note: Get the current activated line
+WALS:1
OK
AT+CPHS?
Note: Get the current activated line
+WALS:1
OK