Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 431)

Short message Commands
Write Message to Memory +CMGW
©Restricted
Page: 85 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
17.10 Write Message to Memory +CMGW
17.10.1 Description
This command stores a message in memory (either SMS-SUBMIT or SMS-DELIVERS).
The memory location <index> is returned (no choice possible as with phonebooks
+CPBW).
Text or PDU is entered as described for the Send Message +CMGS command.
17.10.2 Syntax
Depending on the mode, two syntax commands are available.
• In text mode:
Action command
AT+CMGW=<oa/da>[,<tooa/toda>[,<stat>]] <CR>
> enter text <ctrl-Z / ESC>
OK
• In PDU mode:
Action command
AT+CMGW=<length>[,<stat>]<CR>
> give PDU <ctrl-Z / ESC>
OK
Read command
None
Test command
None