Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 677)

Fax Commands
HDLC Receive Speed +FRH
©Restricted
Page: 129 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
25.5 HDLC Receive Speed +FRH
25.5.1 Description
This command sets the fax receive speed using the HDLC protocol.
25.5.2 Syntax
Action command
AT+FRH=<speed>
OK
Read command
None
Test command
AT+FRH=?
(list of supported <speed>s)
OK
25.5.3 Parameters and Defined Values
<speed>: HDLC fax receive speed
3 V.21 channels 300 bps
25.5.4 Parameter Storage
None.
25.5.5 Examples
Command Responses
AT+FRH=3
Note: Set fax speed at 300 bps
OK
AT+FRH=?
Note: Get possible values
(3)
OK