Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 123)

Wireless CPU ® Status Commands
General Indications +WIND
©Restricted Page: 117 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
<idx>: call identifier
integer value
<phonebook>: phonebook memory storage
"SM" ADN
"FD" FDN
"ON" MSISDN
"SN" Service Number
"EN" Emergency Number
<status>: phonebook status after initialization
0 not reloaded from SIM (no change since last init or SIM
removal)
1 reloaded from SIM to internal memory (at least one entry has
changed)
<checksum>: 128-bit "fingerprint" of the phonebook
The checksums are presented in the following order : SM, FD,
ON, SN, EN, LD. If the phonebook is not present in the SIM, the
checksum is empty.
<ext_it_id>: interruption identifier
0 INT0
1 INT1
<EdgeState>: state of the edge in case of both edge (the interruption happens
with a high to low and low to high edge) (please refer to +WIPC
command description)
0 interruption happens with high to low edge
1 interruption happens with low to high edge
<Full name>: long alphanumerical format name received from the NITZ
message
string type
<Short name>: short alphanumerical format name received from the NITZ
message
string type
<Local time zone>: difference, expressed in quarters of an hour, between the local
time and GMT.
signed integer