Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 121)

Wireless CPU ® Status Commands
General Indications +WIND
©Restricted Page: 115 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
7.1.3 Parameters and Defined Values
<IndLevel>: indication levels
bit field (default value: 0)
bit set to 0: indication deactivated
bit set to 1: indication activated
0 no unsolicited "+WIND: <event>" will occur
1 (bit 0) activate hardware SIM insert / remove indications or SIM
presence after software reset
2 (bit 1) activate calling party alert indication
4 (bit 2) activate idle state indication
8 (bit 3) activate end of Wireless CPU ® initialization (after PIN
1/CHV 1 code entered) indication
16 (bit 4) activate new call identifier indication
32 (bit 5) activate call release indication
64 (bit 6) activate network service available indication
128 (bit 7) activate network lost indication
256 (bit 8) activate audio ON indication
512 (bit 9) activate SIM phonebooks reload status
1024 (bit 10) activate SIM phonebooks checksum indication
2048 (bit 11) activate interruption indication
4096 (bit12) activate hardware Rack Open/Closed Indication
8192 (bit13) activate NITZ indication
16384 (bit 14) activate SMS service ready indication