Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 298)

GPRS Commands
Manual Response to a Network Request for PDP Manual Context Activation +CGANS
©Restricted
Page: 108 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.10 Manual Response to a Network Request for PDP Manual
Context Activation +CGANS
14.10.1 Description
This command requests the MT to respond to a network request for GPRS PDP
context activation which has been signaled to the TE by the RING or +CRING
unsolicited result code.
PDP context activation procedures take place prior to or during the PDP startup.
14.10.2 Syntax
Action command
AT+CGANS[=<response>[,<cid>]]
OK
Read command
None
Test command
AT+CGANS=?
+CGANS: (list of supported <response>s)
OK
14.10.3 Parameters and Defined Values
<response>:
response to the request
integer type
0 reject the request
If <response> is omitted it is assumed to be 0.
1 accept and request that the PDP context be activated
<cid>: PDP context identifier
range: 1-4
integer type
14.10.4 Parameter Storage
None.