Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 247)

Call Control Commands
Incoming Call Bearer +CICB
©Restricted
Page: 57 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
12.12.5 Examples
Command Responses
AT+CICB=2
Note: If no incoming bearer, force a voice call
OK
AT+CICB?
Note: Get current value
+CICB: 2
OK
Note: Default incoming bearer: voice call
AT+CICB=?
Note: Test command
+CICB: (0-2)
OK