Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 278)

GPRS Commands
GPRS parameters customization: +WGPRS
©Restricted
Page: 88 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
• For all other cases:
Action command
AT+WGPRS=<mode>[,[<parameter>][,[<cid>],[<class>]]]
OK
Read command
AT+WGPRS?
+WGPRS: <mode>[,<response>[,<cid>]]
[+WGPRS: <mode>[,<response>[,<cid>]] […]]
OK
Test command
AT+WGPRS=?
+WGPRS: (list of supported <mode>s),(list of supported
<parameter>s),(list of supported <cid>s),(list of supported
<class>s)
OK
Unsolicited response
+WGPRSIND: <techno>