Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 134
Wireless CPU
®
Status Commands
Mobile Equipment Event Reporting +CMER
©Restricted
Page:
128 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 1
August 23, 2007
7.5.3
Parameters and Defined Values
<mode>:
3
(default value)
<keyp>:
keypad event reporting mode
0
disabled (default value)
1
Keypad event reporting is routed using unsolicited code. Only
the key pressings not caused by +CKPD are indicated
2
Keypad event reporting is routed using unsolicited code. All key
pressings are indicated
<ind>:
indicator event reporting mode
0
disabled (default value)
1
Indicator event reporting using unsolicited result code. Only the
indicator events not caused by +CIND shall be indicated by the
TA to TE
2
Indicator event reporting using unsolicited result code. All
indicator events shall be directed from TA to TE
<key>:
keyboard map is (5,5)
0 1 2 3 4
5 6 7 8 9
10 11 12 13 14
15 16 17 18 19
20 21 22 23 24
<press>:
key operation
1
key
pressed
0
key
released
<indresp>:
indicator order number (as specified for +CIND)
<value>:
new value of the indicator
As specified for +CIND except for the <smsfull> indication:
0: the selected memory becomes not full
1: the selected memory has been filled
2: One SMS has been received in the SC but the selected memory
is full
<bfr>:
TA buffer of unsolicited result codes mode
0
TA buffer defined within this command is flushed to the TE
default value