Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 91)

Global Configuration Commands
Set Phone Functionality +CFUN
©Restricted Page: 85 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.10.2 Syntax
Action command
AT+CFUN=<fun>[,<rst>]
OK
Read command
AT+CFUN?
+CFUN: <fun>
OK
Test command
AT+CFUN=?
+CFUN: (list of supported <fun>s),(list of supported <rst>s)
OK
6.10.3 Parameters and Defined Values
<fun>:
functionality level
0 set minimum functionality, IMSI detach procedure
1 set the full functionality mode with a complete software reset
<rst>: no impact if not omitted, only compliance
6.10.4 Parameter Storage
None.