Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 340)

PLMN Commands
Read Operator Name +WOPN
©Restricted
Page: 150 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
15.5 Read Operator Name +WOPN
15.5.1 Description
This Wavecom proprietary command allows to:
• read the operator name in long alphanumeric format from the numeric format,
• read the operator name in short alphanumeric format from the numeric format,
• erase NITZ PLMN names stored in flash memory,
• configure the method used for getting PLMN names.
15.5.2 Syntax
• For <mode>=0 or 1:
Action command
AT+WOPN=<mode>,<NumOper>[,<lac>]
+WOPN=<mode>,<AlphaOper>
OK
• For <mode>=3:
Action command
AT+WOPN=<mode>,0
OK
• For <mode>=4:
Action command
AT+WOPN=<mode>[,<PlmnMethod>]
[+WOPN: <PlmnMethod>]
OK
Read command
None