Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 155)

Serial Port Commands
Set DTR Signal &D
©Restricted Page: 149 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
8.8.5 Examples
Command Responses
AT&D0
Note: The DTR signal is ignored
OK
Note: Command valid
AT&D1
Note: Wireless CPU ® switches from data to
command mode when DTR switches from ON
to OFF
OK
Note: Command valid
AT&D2
Note: Upon DTR switch from ON to OFF, the
call is released
OK
Note: Command valid