Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 62)

Global Configuration Commands
Automatic Boost Mode +WCPS
©Restricted Page: 56 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.3 Automatic Boost Mode +WCPS
6.3.1 Description
This Wavecom proprietary command allows to activate or deactivate the automatic
boost mode functionality in the Wireless CPU ® . When this feature is enabled, the
firmware can change the Wireless CPU ® clock dynamically according to features used
by the service user (like an EGPRS transfer).
The new setting will be taken into account immediately after the automatic boost
mode feature activation or deactivation. When this feature is disabled, the firmware
changes the CPU clock to the lowest frequencies only if the service user hasn’t
enabled the Vari Speed feature (with an Open AT ® application).
6.3.2 Syntax
Action command
AT+WCPS=<type>,<mode>
[+WCPS: <type>,<status>]
OK
Read command
AT+WCPS?
+WCPS: <type>,<status>
[+WCPS: <type>,<status>[
…]]
OK
Test command
AT+WCPS=?
+WCPS: <type>,(list of supported <mode>s)
[+WCPS: <type>,(list of supported <mode>s)[
…]]
OK