Capability to receive +fcr, Fax class 2 commands, 9 capability to receive +fcr – Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 692: At+fcr=<n> ok, At+fcr? <n> ok, At+fcr=? (list of supported <n>s) ok
Fax class 2 Commands
Capability to Receive +FCR
©Restricted
Page:
144 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 4
August 23, 2007
26.9
Capability to Receive +FCR
26.9.1
Description:
This commands controls the capability of the Wireless CPU
®
to accept incoming
faxes.
26.9.2
Syntax
Action command
AT+FCR=<n>
OK
Read command
AT+FCR?
<n>
OK
Test command
AT+FCR=?
(list of supported <n>s)
OK
26.9.3
Parameters and Defined Values
<n>:
capability to receive mode
0 The
Wireless
CPU
®
will not accept incoming faxes.
1 The
Wireless
CPU
®
will accept incoming faxes (default value)
26.9.4
Parameter Storage
The <n> parameter is stored in EEPROM using AT&W command. The default value
can be restored using AT&F.