Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 79
Global Configuration Commands
Features Management +WFM
©Restricted
Page:
73 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 1
August 23, 2007
6.6.3
Parameters and Defined Values
<mode>:
requested operation
0
disable feature <ftrID>
1
enable feature <ftrID>
2
get the feature <ftrID> state
If the <ftrID> parameter is not used, the status of all the
features are listed (with several +WFM responses).
<ftrID>:
feature identification
The +WFM response only uses alphabetical values for the
<FtrID> parameter.
For <FtrID> values with two digits (like 1x, 6x or 8x), the <mode>
0 value is not "allowed". When a "xa" feature is enabled, enabling
another "xb" feature will automatically disable the "xa" feature.
numerical alphabetical
11
"MONO900"
mono-band mode 900 MHz (default: 0)
12
"MONO1800"
mono-band mode 1800 MHz (default:0)
13
"MONO1900"
mono-band mode 1900 MHz (default:0)
14
"BI9001800"
dual-band mode 900/1800 MHz
(default: 0)
15
"BI9001900"
dual-band mode 900/1900 MHz
(default: 0)
16
"MONO850"
mono-band mode 850 MHz (default: 0)
17
"BI8501900"
dual-band mode 850/1900 MHz
(default: 0)
18
"QUADBAND"
quad-band mode 850/900/1800/1900
MHz (default: 1)
2
"EFR"
enhanced full rate feature (default: 1)
3
"HR"
half rate feature (default: 1)
4
"DTXDATA"
data with DTX feature (default: 1)
5
"DATA144"
data 14.4 kbits/s feature (default: 1)
61
"SIM3VONLY"
3V SIM voltage mode (default: 0)
62
"SIM1V8ONLY"
1,8V SIM voltage mode (default: 0)
63
"SIM1V8AND3V"
1,8V and 3V SIM voltage mode
(default: 1)
7
"SIMREMOVE"
SIM removal feature (default: 1)