Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 337)

PLMN Commands
Operator List Management +WOLM
©Restricted
Page: 147 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
15.4 Operator List Management +WOLM
15.4.1 Description
This Wavecom proprietary command allows a new or modified operator to be added
to the PLMN list. At most 10 PLMNs can be created and stored in the flash memory.
Note that if two entries with the same network (MCC+MNC), but having different
names, are entered, the first one will be taken into account to have the name.
15.4.2 Syntax
Action command
AT+WOLM=<mode>,<loc>[,<NumOper>,<short name>,<long name>]
OK
Read command
AT+WOLM?
+WOLM: <loc>,<NumOper>,<short name>,<long name>
[+WOLM: <loc>,<NumOper>,<short name>,<long name>[…]]
OK
Test command
AT+WOLM=?
OK