Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 453)

Short message Commands
Un-change SMS Status +WUSS
©Restricted
Page: 107 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
17.17 Un-change SMS Status +WUSS
17.17.1 Description
This Wavecom proprietary command is used to keep the SMS Status to UNREAD
after +CMGR or +CMGL.
17.17.2 Syntax
Action command
AT+WUSS=<mode>
OK
Read command
AT+WUSS?
+WUSS: <mode>
OK
Test command
AT+WUSS=?
+WUSS: (list of supported <mode>s)
OK
17.17.3 Parameters and Defined Values
<mode>:
SMS status change mode
1 the SMS status will not change
0 the SMS status will change (default value)
17.17.4 Parameter Storage
The parameter <mode> is stored in EEPROM. The default value can be restored using
AT&F.