Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 336)

PLMN Commands
Preferred Operator List +CPOL
©Restricted
Page: 146 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
15.3.6 Notes
The different possibilities are:
• AT+CPOL=<index>, to delete an entry.
• AT+CPOL=,<format>, to set the format used by the read command
(AT+CPOL?).
• AT+CPOL=,<format>,<oper>, to put <oper> in the next free location.
• AT+CPOL=<index>,<format>,<oper>, to write <oper> in the <format> at the
<index>.
• AT+CPOL=<index>,<format>,<oper>,<GSM_AcT>,<GSMcp_Act>,<Utran_Act
>, to write <oper> in the <format> at the <index> giving the access
technology (in the case of EF_PLMNwact, EF_HPLMNwact or EF_OPLMNwact
is present).
Note:
If access technology parameters are not given, the GSM access technology will be
chosen.
The supported formats are those of the +COPS command. The length of this list is
limited to 85 entries for EF_PLMNsel, and 51 for EF_PLMNwAct, EF_OPLMNwAct,
EF_HPLMNwAct.