Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 93)

Global Configuration Commands
Wavecom Reset +WRST
©Restricted Page: 87 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.11 Wavecom Reset +WRST
6.11.1 Description
This Wavecom proprietary command resets the Wireless CPU ® after a programmed
delay. The Wireless CPU ® will reset cyclically until this mode is disabled.
6.11.2 Syntax
Action command
AT+WRST=<Mode>,<Delay>
OK
Read command
AT+WRST?
+WRST: <Mode>[,<Delay>,<RemainTime>]
OK
Test command
AT+WRST=?
OK
6.11.3 Parameters and Defined Values
<Mode>: timer reset mode
0 disabled
1 enabled
<Delay>: time set to reset the Wireless CPU ®
range: "000:01"- "168:59" (format hhh:mm)
<RemainTime>: time before next reset
range: "000:01"- "168:59" (format hhh:mm)