Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 727)

APPENDIXES
Examples
© Restricted
Page: 21 / 80
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 APPENDIXES August 23, 2007
2 Examples
This chapter gives illustrative examples of the general AT commands used for a
communication. The presentation of commands and responses is as close as possible
to what a user can see on its test monitor. Blank lines have been intentionally
removed. The characters on the left margin are DTE generated. Middle column
characters are Wireless CPU ® generated.
2.1 Examples with the PIN Required
2.1.1 When the ME has to be powered ON.
AT+CMEE=1 Enable the report mobile equipment errors
OK
AT+CREG=1 Report registration
OK
AT+CPAS Query ME Status
+CPAS: 5 (ME is asleep)
OK
AT+CFUN=1 Set ME to full functionality
OK
AT+COPS=0 Ask for automatic operator selection and registration .
+CME ERROR: 11 SIM PIN required .
AT+CPIN=1234 User entered a wrong PIN
+CME ERROR: 16 Incorrect password .
AT+CPIN=0000
OK PIN Ok
AT+COPS=0 Ask for automatic operator selection and registration .
OK
+CREG:1 Registered on the network
AT+COPS=3,0 Select the long name alphanumeric format .
OK
AT+COPS? Get the operator name
+COPS: 0,0,"I OMNITEL"
OK