Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 390)

Phonebooks Commands
Read a Phonebook Group +WPGR
©Restricted
Page: 44 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
16.9 Read a Phonebook Group +WPGR
16.9.1 Description
This Wavecom proprietary command reads the phonebook group entries, the
phonebook group name or the number of entries used in a group.
16.9.2 Syntax
Depending on the mode, several syntaxes are available for the action command:
• <mode>= 1, 2
Action command
AT+WPGR=<mode>[,<group index>]
+WPGR: <group index>,<group name>
[+WPGR: <group index>,<group name>[…]]
OK
• <mode>= 3
Action command
AT+WPGR=<mode>,<group index>
+WPGR: <loc>,<num>,<type>,<name>[,<contact>][,<phb_group>]
[+WPGR: <loc>,<num>,<type>,<name>[,<contact>][,<phb_group>][…]]
OK
Note :
The response syntax is the same as +CPBR (refer to CPBR command for more details.
(§ 16.4).