Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 592)

Audio Commands
Wavecom Voice Rate +WVR
©Restricted
Page: 44 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
21.12 Wavecom Voice Rate +WVR
21.12.1 Description
This Wavecom proprietary command allows the voice rate for bearer voice to be
configured for outgoing and incoming calls.
21.12.2 Syntax
Action command
AT+WVR=[<out_coding_type>][,<in_coding_type>]
OK
Read command
AT+WVR?
+WVR: <out_coding_type>,<in_coding_type>
OK
Test command
AT+WVR=?
+WVR: (list of supported <out_coding_type>s),(list of supported
<in_coding_type>s)
OK