Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 683)

Fax Class 2 Commands
Transmit Page Punctuation +FET
©Restricted
Page: 135 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
26.3 Transmit Page Punctuation +FET
26.3.1 Description
This command punctuates page and document transmission after the +FDT
command. It indicates that the current page is complete, and if there are additional
pages to send.
The +FET unsolicited response reports post page message response.
26.3.2 Syntax
Action command
AT+FET=<ppm>
OK
Read command
None
Test command
None
Unsolicited response
+FET: <ppm>
26.3.3 Parameters and Defined Values
<ppm>: post page message
0 another page next, same document
1 another document next
2 no more pages or documents
3 another partial page next
4 another page, procedure interrupt
5 another document, procedure interrupt
6
all done, procedure interrupt