Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 650
Battery Commands
Wavecom Autodiag +WDIAG
©Restricted
Page:
102 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 4
August 23, 2007
<indication>:
type of event
0
current value (not available in best effort mode)
1
ADC value is under the minimum threshold value (<trig1>)
2
ADC value is above the minimum threshold value (<trig1>)
(only after an unsolicited response with <indication>=1)
3
ADC value is under the maximum threshold value (<trig2>)
4
ADC value is under the maximum threshold value (<trig2>)
(only after an unsolicited response with <indication>=3)
5
The delta between two values among the <trig3freq> last
values is more important than the delta threshold value
(<trig3>)
<value>:
ADC value in mV
range: 1-8000
for <indication> = 0: the current ADC value
for <indication> = 2: the minimum ADC value read while
the minimum threshold has been exceeded.
for <indication> = 4: the maximum ADC value read while
the maximum threshold has been exceeded.
for <indication> = 5: the delta ADC value read
23.3.4
Parameter Storage
The parameters are stored in EEPROM using the AT&W.command The default value
can be restored using AT&F.