Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 332)

PLMN Commands
Preferred Operator List +CPOL
©Restricted
Page: 142 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
15.3 Preferred Operator List +CPOL
15.3.1 Description
This command is used to edit (or update) the SIM preferred list of networks. This list
is read in the SIM file selected by +CPLS command.
15.3.2 Syntax
Action command
AT+CPOL=[<index>][,<format>[,<oper>[,<GSM_AcT>,<GSMcomp_Act>,
<Utran_Act>]]]
OK
Read command
AT+CPOL?
+CPOL: <index>,<format>,<oper>[,<GSM_AcT>,<GSMcomp_Act>,
<Utran_Act>]
[+CPOL: <index>,<format>,<oper>[,<GSM_AcT>,<GSMcomp_Act>,
<Utran_Act>][…]]
OK
Test command
AT+CPOL=?
+CPOL: (list of supported <index>s),(list of supported <format>s)
OK