Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 250)

Call Control Commands
Service Reporting Control +CR
©Restricted
Page: 60 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
12.14 Service Reporting Control +CR
12.14.1 Description
This command enables a detailed type of service reporting in case of incoming or
outgoing data calls. Before sending the CONNECT response to the application, the
product will specify the type of data connection which has been set up.
12.14.2 Syntax
Action command
AT+CR=<mode>
OK
Read command
AT+CR?
+CR: <mode>
OK
Test command
AT+CR=?
+CR: (list of supported <mode>s)
OK
Unsolicited response
+CR: <type>