Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 492)

SIM ToolKit Commands
SIM ToolKit Get Information +STGI
©Restricted
Page: 146 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
19.4 SIM ToolKit Get Information +STGI
19.4.1 Description
This Wavecom proprietary command allows to get the information (e.g. text to
display, menu information, priorities…) of a proactive command sent by the SIM.
The information is returned only after receiving a SIM ToolKit indication (+STIN).
19.4.2 Syntax
Depending on the value of the <CmdType> parameter several response syntaxes are
available:
• For <CmdType>=0: get information about "Setup Menu" (No action expected
from SIM).
Action command
AT+STGI=<CmdType>
+STGI: <Alpha Identifier menu>
+STGI: <Id>,<NbItems>,<AlphaId Label>,<HelpInfo>[,<NextActionId>]
[+STGI: <Id>,<NbItems>,<AlphaId Label>,<HelpInfo>[,<NextActionId>]
[…]]
OK
• For <CmdType>=1: get information about "Display Text" (No action expected
from SIM).
Action command
AT+STGI=<CmdType>
+STGI: <Prior>,<Text>,<ClearMode>
OK