Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 495)

SIM ToolKit Commands
SIM ToolKit Get Information +STGI
©Restricted
Page: 149 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
• For <CmdType>=10: get information about "Send USSD" proactive command.
(No action, "Send USSD" done automatically by product)
Action command
AT+STGI=<CmdType>
+STGI: <TextInfo>
OK
• For <CmdType>=11: get information about "Setup Event List".
Action command
AT+STGI=<CmdType>
+STGI: <Evt>
OK
• For <CmdType>=12: get information about "Setup Idle Mode Text".
Action command
AT+STGI=<CmdType>
+STGI: <Text>
OK
• For <CmdType>=13: get information about "Send DTMF".
Action command
AT+STGI=<CmdType>
+STGI: <TextInfo>
OK
• For <CmdType>=14: get information about "Language Notification".
Action command
AT+STGI=<CmdType>
+STGI: <Specific>[,<Code>]
OK