Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 493)

SIM ToolKit Commands
SIM ToolKit Get Information +STGI
©Restricted
Page: 147 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
• For <CmdType>=2: get information about "Get Inkey" (SIM expects key pressed
sent using +STGR)
Action command
AT+STGI=<CmdType>
+STGI: <InkeyFormat>,<HelpInfo>[,<TextInfo>]
OK
• For <CmdType>=3: get information about ‘"Get Input" (SIM expects key input
sent using +STGR)
Action command
AT+STGI=<CmdType>
+STGI:
<InputFormat>,<EchoMode>,<SizeMin>,<SizeMax>,<HelpInfo>[,<TextInfo>,
<DefaultText>]
OK
• For <CmdType>=4: get information about "Setup Call" (If <Class> is omitted,
call is processed as a voice call)
Action command
AT+STGI=<CmdType>
+STGI: <Type>,<CalledNb>,<SubAddress>,<Class>,<AlphaId>,<AlphaId2>
OK
• For <CmdType>=5: get information about "Play Tone" (No action)
Action command
AT+STGI=<CmdType>
+STGI: <ToneType>[,<TimeUnit>,<TimeInterval>,<TextInfo>]
OK