Plmn commands – Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual

Page 331

Advertising
background image


PLMN Commands

Operator Selection +COPS

©Restricted

Page:

141 / 156

This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.

WM_DEV_OAT_UGD_049 - 001

VOLUME 2

August 23, 2007

15.2.6 Notes

• If an incoming call occurs during a PLMN list request, the operation is aborted

(+CME ERROR: 520) and the unsolicited RING appears.

• If SPN (Service Provider Name) is present in the SIM, it will be returned in both

long and short alphanumeric <oper> fields. The string in the "short" field will be

the SPN truncated to the appropriate number of characters (10).

• The fact that the network supports emergency call (+CME ERROR: 547) does

not imply that emergency call without SIM is working. The only way to verify

this state, is to do ATD112

• If the PLMN is unknown (meaning not present in the ROM table (see +COPN

command), not present in FLASH (see +WOLM command), and also not
present in SIM (E-ONS, ONS...)), the returned long name is formatted like "MCC

XXX MNC YY(Y)" and the returned short name is formatted like "XXX YY(Y)"

where XXX is the MCC (3-digits) and YY(Y) is the MNC (2-digits or 3-digits).

Advertising