Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 616)

Audio Commands
Initialize Voice Parameters +VIP
©Restricted
Page: 68 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
21.22 Initialize Voice Parameters +VIP
21.22.1 Description
This command allows factory settings for voice parameters to be restored from
EEPROM.
These voice parameters include:
• gain control (+VGR & +VGT commands),
• speaker & microphone selection (+SPEAKER command),
• echo cancellation (+ECHO command),
• side tone modification (+SIDET command),
• digital gain (+WDGT, +WDGR commands),
• audio filter (+WADF command),
• loudspeaker volume level (+CLVL command).
21.22.2 Syntax
Action command
AT+VIP=<n>
OK
Read command
AT+VIP?
+VIP: <n>
OK
Test command
AT+VIP=?
+VIP: (list of supported <n>s)
OK