Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 713)

APPENDIXES
Codes and Values
© Restricted
Page: 7 / 80
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 APPENDIXES August 23, 2007
<error> Meaning Resulting from the following commands
536 Class locked: a command has
been launched from a port, the
effect is to lock all commands
belonging to the same class. If
another port launches a command
of this class, this error will occur
as long as the class is not
released (at first command’s
completion time)
All commands
537 Phonebook group full. +CPBW
538 Not Enough Space to copy SMS +WMCP
539 Invalid SMS +CMGR
541 Open AT ® application and AT
software version do not match
+WOPEN
543 CMUX connection is refused by
remote, after a restart of CMUX
protocol by Wireless CPU
® , due to
a 27.010 connection loss during
virtual channels establishment.
+CMUX
544 CMUX connection Timeout (no
answer from the remote) ie no
DLC0 opened response. +CMUX
545 A CMUX session has been started
on a physical UART, and user
tries to start another CMUX
session on other physical UART.
The error,
+CME ERROR: 545 is
raised on the UART where
at+cmux command is trying to be
started again.
+CMUX
546 Emergency call is not allowed
without SIM +COPS
547 Emergency call is allowed without
SIM +COPS
548 No flash objects to delete +WOPEN
549 The phone number of the
requested phonebook entry is
empty ATD><index>[;], ATD><phonebook><index>[;]
550 Unable to resize the Application &
Data storage place, since the new
required size would overlap with
the current Open AT
® application
storage place.
+WOPEN
551 Service abort request has failed AT +WAC
552 Unsolicited responses for
autodiag or charge indications are
already activated on another port +WDIAG, +WBCM
553 The PUK 1 code is burned but PIN
1/CHV 1 code is OK +CPIN, +CKPD, D (sequence)
554 The SIM is blocked (PIN 1/CHV 1
and PUK 1 codes are burned) All GSM 07.07 commands
555 AT command aborted by a
POWER OFF (the AT command
treatment should be partial) +COPS, +CPIN, +CPIN2, +CMGL, +CMGR, +CMGD,
+WDCP, +WLPR, +WLPW, +CCID, +CSIM, +CRSM,
+CLCK, +CACM, +CAMM, +CPUC, +WMSC, +WMCP,
+CPOL, +CSQ, +CCED