Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 286)

GPRS Commands
Define PDP Context +CGDCONT
©Restricted
Page: 96 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.3.5 Examples
Command Responses
AT+CGDCONT=? +CGDCONT: (1-4),"IP",,,(0-1),(0-1)
+CGDCONT: (1-4),"PPP",,,0,0
OK
AT+CGDCONT=1,"IP","internet" OK
AT+CGDCONT? +CGDCONT: 1, "IP", "internet",,0,0
OK
AT+CGDCONT=1
Note: Delete <cid>=1
OK
AT+CGDCONT? OK
14.3.6 Notes
The data compression algorithm provided in SNDCP is V.42bis.
Due to Wavecom choice, 4 PDP contexts can be specified with only one activated at
the same time.
A special form of the set command, AT+CGDCONT=<cid> causes the values for
context number <cid> to become undefined.