Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 214)

GSM Network Commands
Wavecom Location +WLOC
©Restricted
Page: 24 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
11.6 Wavecom Location +WLOC
11.6.1 Description
This Wavecom proprietary command can be used by the application to retrieve the
following local information: MCC-MNC, LAC, CI, Network measurement, BCCH
channel list, Timing Advance, date and time.
Two methods exist for the external application to get these information:
• on request of the application,
• periodically by the Wireless CPU
® .
The location feature has to be activated to get information (see +WFM command).
11.6.2 Syntax
• <mode>=0
Action command
AT+WLOC=<mode>
OK
• <mode>=1
Action command
AT+WLOC=<mode>
+WLOC: [<MCC-MNC>,][<LAC > ,][<CI>,][<NetMeas>,][<BCCHlist>,][<TA>,]
[<Date and Time>]
OK
• <mode>=2
Action command
AT+WLOC=<mode>[,<time period>]
OK