Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 594)

Audio Commands
Wavecom Voice Rate +WVR
©Restricted
Page: 46 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
21.12.5 Examples
Command Responses
AT+WVR=? +WVR: (0-14),(0-14)
Note: HR, EFR and AMR available
AT+WVR=1
Note: Configures voice type FR and EFR for
outgoing calls only
OK
Note: Bearer is configured for outgoing calls
AT+WVR=1,4
Note: Configures voice type FR and EFR for
outgoing calls and HR and EFR for incoming
calls
OK
Note: Bearer is configured for outgoing and incoming calls
AT+WVR=,4
Note: Configures voice type HR and EFR for
incoming calls
OK
Note: Bearer is unchanged for outgoing calls and
configured for incoming calls
AT+WVR?
Note: Asks for the current values
+WVR: 1,4
OK