Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 239)

Call Control Commands
Remote disconnection
©Restricted
Page: 49 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
12.8 Remote disconnection
This message is used by the product to inform the application that an active call has
been released by the remote user.
The product sends "NO CARRIER" to the application and sets the DCD signal.
In addition, for AOC, the product can release the call if credit has expired (release
cause 68 with +CEER command).