Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 203

GSM Network Commands
Cell environment description +CCED
©Restricted
Page:
13 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 2
August 23, 2007
11.3.3
Parameters and Defined Values
<mode>:
requested operation
0
one shot requested
the requested dump is returned as intermediate response
1
automatic
shots
requested
the requested dump is returned by the wireless CPU
®
as
unsolicited response
2
stop automatic shots
<requested
dump>:
requested cell parameter
If omitted, the last value used for a CCED request is used, or 15 (if
the command has not been previously used)
1
Main Cell only
+CCED: <Main Cell dump>
2
Neighbours 1 to 6
+CCED: <Neighbor 1 dump>[,<Neighbor 2 dump>[,<Neighbor 3
dump>[,<Neighbor 4 dump>[,<Neighbor 5 dump>[,<Neighbor 6
dump>]]]]]
3
Main Cell then Neighbours 1 to 6
+CCED: <Main Cell dump>,<Neighbor 1
dump>[,<Neighbor 2 dump>[,<Neighbor 3
dump>[,<Neighbor 4 dump>[,<Neighbor 5
dump>[,<Neighbor 6 dump>]]]]]
4
Main Cell Timing Advance
+CCED: <Main Cell TA>
5
Main Cell, then Timing Advance
+CCED: <Main Cell dump>[,<Main Cell TA>]
6
Neighbours 1 to 6, then Timing Advance
+CCED: <Neighbor 1 dump>[,<Neighbor 2
dump>[,<Neighbor 3 dump>[,<Neighbor 4
dump>[,<Neighbor 5 dump>[,<Neighbor 6
dump>]]]]][,<Main Cell TA>]
7
+CCED response: Main Cell, then Neighbours 1 to 6, then
Timing Advance
+CCED: [<Main Cell dump>][[,]<Neighbor 1
dump>[,<Neighbor 2 dump>[,<Neighbor 3
dump>[,<Neighbor 4 dump>[,<Neighbor 5
dump>[,<Neighbor 6 dump>]]]]]][,<Main Cell TA>]