Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 583)

Audio Commands
Audio Filter Command +WADF
©Restricted
Page: 35 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
21.10 Audio Filter Command +WADF
21.10.1 Description
This Wavecom proprietary command enables/disables the high and low pass filter in
TX and RX mode.
21.10.2 Syntax
Action command
AT+WADF=<mode>,<filter>[,[<param1>][,[<param2>]
[,[<param3>][,[<param4>][,[<param5>][,[<param6>][,[<param7>][,
[<param8>][,[<param9>][,[<param10>]]]]]]]]]]]
[+WADF:
<mode>,<filter>,<param1>,<param2>,<param3>,<param4>,<param5>,
<param6>,<param7>,<param8>,<param9>,<param10>]
OK
Read command
AT+WADF?
+WADF: <mode>,<filter>,<param1>,<param2>,<param3>,
<param4>,<param5>,<param6>,<param7>,<param8>,<param9>,<param10>
[+WADF: <mode>,<filter>,<param1>,<param2>,<param3>,
<param4>,<param5>,<param6>,<param7>,<param8>,<param9>,<param10>[…]]
OK
Test command
AT+WADF=?
+WADF: (list of supported <mode>s),(list of supported <filter>s),
(list of supported <param1>s),(list of supported <param2>s),
(list of supported <param3>s),(list of supported <param4>s),
(list of supported <param5>s),(list of supported <param6>s),
(list of supported <param7>s),(list of supported <param8>s),
(list of supported <param9>s),(list of supported <param10>s)
OK