Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 257)

Data Commands
Bearer Type Selection +CBST
©Restricted
Page: 67 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
13.2.5 Examples
Command Responses
AT+CBST=? +CBST: (0-8,12,14,65,66,68,70,71,75),
(0),(0-3)
OK
AT+CBST=7,0,1 OK
Note: Select a bearer
AT+CBST?
Note: Current values
+CBST: 7,0,1
OK
13.2.6 Notes
For incoming calls, if <ce> is set to "Transparent only" and the network offers only
"Non Transparent" or vice versa, then the call is released.
<ce> parameter values 2 and 3 are equivalent to former values 100 and 101. These
values are managed for compatibility purposes, but they may not be used in new
code (2 as former 100, and 3 as former 101).